The widespread use of micro-electronics in the automotive and
electronics industry, in particular of the miniaturization and of
modularization of components, makes necessary to pay special
attention to the protection of the individual parts.
The reason why it is necessary to use peculiar protection for
electrical and electronic parts (LEDs, relays, switches) is to
protect them from heat, moisture, dust, mechanics impact to
guarantee long operation.
In order to make these protections injections of PVC or standard
POLYAMIDES can be used, but the high pressure (greater than 300
bar) used in these processes can damage sensitive components.
HOT MELT molding technology offers an alternative of small, medium
and large quantities of productions.
This technology uses low pressure (2-25 bar), which also allows the
use of simple aluminum molds at low cost.
The injection into the mold is carried out by special valves that
control the volume of resin to be injected.
The materials used in the hot melt have a good adhesion on many
materials, do not generate gas, they are water resistant and
overprintable.
There are only a few thermoplastics used in tank whose
characteristics depend from molding project needs and from
technical specifications related to it.
Product features
1. Single-station low-pressure injection molding machine adopts
single-station top-type glue injection system. The models designed
for a variety of different injection-molded encapsulation products,
especially the design of the left and right parallel connection
wire outlet molds are more reasonable and reliable.
2. The operating table and the sol system adopt a split layout,
which is flexible to use. The glue injection gun is connected with
the glue tank through the hose; the structure is compact and the
performance is stable.
3. The clamping adopts gas-liquid pressurized cylinder, which has
greater clamping force, which is suitable for mass production of
products with large injection area and large injection volume.
5. Single station low pressure injection molding machine, computer
touch screen man-machine interface, real-time monitoring and
simulation display man-machine control system. The injection
pressure is adjustable, and the DELTA temperature control module
can accurately monitor the temperature.
6. The two-hand switch mold clamping, safety grating, and emergency
stop switch ensure safe operation.
7. The mold is easy to replace, and the product ejection device is
built in the workbench to facilitate the removal of the product.
8. The machine is designed according to the ergonomic footboard,
which is convenient for production and operation.
| Model | | JTT-100(D) |
| Injection system | cylinder Diameter/length | mm | Φ8*1600 |
| Injection Pressure | kg/cm2 | 1.5-4 |
| Max shot weight | g | 100 |
| Nozzle Stroke | mm | 50 |
| Number of Temperature Control | - | 1+2 |
| Hopper Capacity | L | 6 |
| Clamping system | Clamping Force | tons | 1 |
| Opening Force | tons | 0.4 |
| Platen Size | mm | 220*330 |
| Distance Between Tie Bar | mm | 390 |
| Min Mold Height | mm | 20 |
| Opening Stroke | mm | 150 |
| Max Open Daylight | mm | 200 |
| Ejector Force | tons | 0.1 |
| Ejector Stroke | mm | 10 |
| Air pressure electric system | Into the main pressure | kgf/cm2 | 5-7 |
| Voltage | V | 220 |
| Motor power | kw | 0.4 |
| Total Power | kw | 3.4 |
| Working power | KW | 0.8 |
| Other | Machine Weight | tons | 0.5 |
| Machine Dimension | m | 0.8*0.75*1.67 |
Our Company
Shenzhen Onetop Technology Co Ltd , is a manufacturer which
combines R&D and marketing ,we have professional R&D team
as well as proficient stuff ,and has been specializing in
researching and producing high quality lithium battery machine for
10 years . Our main products ranges from 18650 battery pack
assembly machine ,Power Battery PACK assembly machines ,Power Bank
Assembly machine,Mobile Phone Battery assembly Machines,Battery
safety test equipment,Injection molding machine,Molds, Molding
materials, machine parts, etc
We keep in place with the word ,we adopt lastest technology and
design ,our Onetop series battery machine stands out in the same
industry area ,they are of national advanced technologycal level
and have been identified by experts from Shenzhen Science &
Technology and Information Bureau .Up to now ,we have obtained many
inventions patents ,practical new patents ,and own independent
intellectual property rights
.
With the increasing development ,We have created two workshops to
manufacture battery machines and injection molding machines
Through our efforts, the Automatic Battery PACK Assembly machines
are now widely used in Mobile phone,Power bank,Laptop,Electric
bikes,Electric vehicle,solar street lights,Solar energy
storage,Banks,LED devices,Health Equipments ect,the low-pressure
injection molding machines are now widely used in PCBs, sensor
products, wiring harnesses, medical electronic products, etc. In
addition, OEM/ODM services can be provided to customers worldwide.
Our products enjoy high quality and guarantee all-weather
after-sales service, thus winning our 70% market share.we look
forward to cooperation with the customers all over the world .
Customer Cases
Contact us
Ms.Tina (Sales manager)
Cel/Wechat/whatsapp:+86-13543252590
Email: admin@onetop-tech.com
Add:No.410,Donghuan road,Shajing,Bao'an district,Shenzhen,China
